Cycle Simulator/Live ModeThis is an advanced strategy that you can use to switch between Simulation and Live modes
or vice versa, between Live and Sim modes.
It will take a while to get your head around this sometimes as it can get a bit confusing,
but at the same time very powerful.
In order to bet live you should start in live mode..
You need to activate the option first.
1 Cycle is one change from live to sim or sim to live. Sim - Live - Sim would be 2 cycles.
So always using an even number 2,4,6 etc you will always end back at sim.
Set whether to start with sim mode or live mode first.
There is an option to reset the staking when changing modes also. It maybe safer.
Then in Sim/Live settings you can decide what will trigger the change from sim to live or
live to sim.
So for example you might want to start lay betting in simulation mode, then after 2 losses in a row
change to live mode to place a real live bet, then after 1 win return to Simulation.
The settings would be as shown below:
Set the option to active.
10 cycles, means it will do sim-live-sim 5 times.
Reset the stake when a trigger is true.
Then set the sim trigger to 2 losses.
Then the Live trigger settings are set to 1 Win.
These could be lay bets on the 1st fav maybe or whatever your strategy is.
As you can see there are many options to trigger the sim/live toggle feature and is very powerful once you
understand it.
|