By entering a figure other than 0 in the virtual Wallet you can set a Virtual Bank.
The software will use this bank in all calculations with % bank stakes etc. in live and simulation modes.
So you could have a bank of £5000 for instance but set the virtual bank to £500 as you don’t want
to use it all to calculate stakes. If you had a bank of £100 you could test with larger banks etc.
Just set the virtual wallet you want. Set it back to 0.00 again to revert to the real wallet.
Here we set the virtual bank to £500. Used the % bank stake at 1.00% so the next bet will be based on 1% of £500 = £5.00.
As you can see a Lay bet of £5 was placed and it won £4.90 so the bank is now £504.90 including commissions taken off.
The % Bank stake is also set to only adjust upwards so the stake will not decrease as the
bank decreases.
It will only increase as the Bank increases.
Turn this off to allow the Stake to increase and decrease with the bank.
|